TeamViewer is 100% broken in SandBoxie

Post Reply
rolex
Posts: 1
Joined: Thu Mar 07, 2024 7:47 pm

TeamViewer is 100% broken in SandBoxie

Post by rolex »

Latest TeamViewer is 100% broken inside SandBoxie. Can't even get it to install anymore, it ends up erroring along the way after unzipping the archives. Then if you pick "Run only 1 time" it also fails to load, hangs on Starting TeamViewer screen on the new interface. If you use the old interface you can no longer connect to clients.

This is a disaster, help!

User avatar
bastik-1001
Posts: 401
Joined: Sat Apr 22, 2023 8:30 am
Contact:

Re: TeamViewer is 100% broken in SandBoxie

Post by bastik-1001 »

Did previous versions of TeamViewer work with the same version of Sandboxie?

sandb0xie
Posts: 2
Joined: Wed Apr 21, 2021 3:23 pm

Re: TeamViewer is 100% broken in SandBoxie

Post by sandb0xie »

Older versions of TeamViewer, such as version 15.21.6, do work in the current version of Sandboxie.

In Sandboxie Plus 1.13.7 (x64), the current version 15.53.7 of TeamViewer will not install successfully.

At nearly the end of installation, TeamViewer Setup reports:
"Error: An error occurred during the installation. Installation aborted!"

See screenshot:

Screenshot 2024-05-17 120709.png
Screenshot 2024-05-17 120709.png (27.67 KiB) Viewed 501 times

User avatar
bastik-1001
Posts: 401
Joined: Sat Apr 22, 2023 8:30 am
Contact:

Re: TeamViewer is 100% broken in SandBoxie

Post by bastik-1001 »

I can reproduce that the current version can't be installed in a standard box, even with faking admin rights.

Thank you for confirming that older versions work with the recent version of Sandboxie, which suggests, that they changed something.

Maybe David will look into this to see if something can be done to restore compatibility.

offhub
Posts: 9
Joined: Tue Sep 05, 2023 9:29 pm

Re: TeamViewer is 100% broken in SandBoxie

Post by offhub »

Then if you pick "Run only 1 time" it also fails to load, hangs on Starting TeamViewer screen on the new interface.
Try with the following setting.

Code: Select all

DropAdminRights=y

Post Reply